New Items

Product Details:

we present excellent products, but we are also flexible enough to make superfast deliveries and within the promised time. Stringent quality checks have been employed upon the raw materials which we source. For this, we have hired special quality analysts who check the materials against different parameters.

Product Details:

Specification:-

• Model: TSI-LTE-500
• Make: Tec-Sol
• Type: Optical Encoder
• Gauge Length: Variable As Per Spec
• Maximum Extension: 750mm
• Resolution: 10 Micron.
• Accuracy: Within 0.1%
• Repeatability:Within 1%
• Length :1 Meter

Product Details:

Compressive strength or compression strength is the capacity of a material or structure to withstand loads tending to reduce size, as opposed to tensile strength, which withstands loads tending to elongate. In other words, compressive strength resists compression (being pushed together), whereas tensile strength resists tension (being pulled apart). In the study of strength of materials, tensile strength, compressive strength, and shear strength can be analyzed independently.

Some materials fracture at their compressive strength limit; others deform irreversibly, so a given amount of deformation may be considered as the limit for compressive load. Compressive strength is a key value for design of structures.

Product Details:

Being a quality driven firm, we source the raw material from the certified vendors only who assure us for the quality and reliability of the material. As we have marked a distinct name in the market, we are recognized as the trusted organization for supplying quality Servo Control Universal Testing Machine.

Features

• Loading accuracy as high as ±1%
• Straining roll autographic recorder supplied as standard to enable study at the behaviour of materials.
• Motor driven threaded columns for quick effortless adiustment of lower Crossthead to facilitate rapid fixing of test specimen.
• High reading accuracy due to large size and design of dial.
• Wide range at standard and special accessories, induding load stabilizer.
• Easy change from plain to threaded and screwed specimens.
• Large effective clearance between columns enables testing of standard specimens as well as structures.
• Simple controls for ease of operation.
  Robust straining frame at an extremely rigid construction.
• Safe operation ensured by means of safety devices.
• Fully enclosed and protected pendulum.

Appications
Tee-sol Universal Testing Machine is designed for testing metals and other materials under tenstion, compression bending, transverse and shear loads. Hardness test on metals can also be conducted

Accuracy & Calibration

All Tec-sol Universal Testing Machines are closely controlled for sensitivity, accuracy and calibration during every stage of manufacture. Every Machine is then calibrated over each at its measuring ranges in accordance with the procedure laid down in British Standards 1610: 1964 and 15: 1828-1975. Tec-sol Universal Testing Machines Comply with grade "A“ of BS : 1610 : 1964 and grade 1.0 of
15-1828-1975 An accuracy of + 1 % is guaranteed from 2096 of the load range selected to full load. Bellow 20% of the selected range, the maximum permissible error is 0.2% of the full reading.

Product Details:

• Load frame - Usually consisting of two strong supports for the machine. Some small machines have a single support.
• Load cell - A force transducer or other means of measuring the load is required. Periodic calibration is usually required by governing regulations or quality system.
• Cross head - A movable cross head (crosshead) is controlled to move up or down. Usually this is at a constant speed: sometimes called a constant rate of extension (CRE) machine. Some machines can program the crosshead speed or conduct cyclical testing, testing at constant force, testing at constant deformation, etc. Electromechanical, servo-hydraulic, linear drive, and resonance drive are used.
• Means of measuring extension or deformation - Many tests require a measure of the response of the test specimen to the movement of the cross head. Extensometers are sometimes used.
• Output device - A means of providing the test result is needed. Some older machines have dial or digital displays and chart recorders. Many newer machines have a computer interface for analysis and printing.
• Conditioning - Many tests require controlled conditioning (temperature, humidity, pressure, etc.). The machine can be in a controlled room or a special environmental chamber can be placed around the test specimen for the test.
• Test fixtures, specimen holding jaws, and related sample making equipment are called for in many test methods.